Industrial Freezer Model 40-9.4

Industrial Freezer model 40-9.4

The industrial freezer model 40-9.4 is a ruggedly built industrial chest freezer which can operate from 0°C to -40°C. It is designed for use in industrial settings where strength and durability are required. Can be used for production or R&D. Common industrial applications include epoxy storage, shrink fitting and cold temperature testing.

It features an all-steel construction, inside and out with key-lockable lid, digital temperature controller, audio/visual alarm system, casters for easy mobility and cfc-free refrigerants. All industrial freezers are backed by an 18 month parts and labor warranty! This industrial freezer can be equipped with a host of accessories like chart recorders, access ports, backup systems and many more.

For use in industrial or laboratory applications where performance and quality count;

SPECIFICATIONS
Model	40-9.4
Temperature Range	0°C to -40°C
Thermostat	Digital controller
Construction	Welded steel, zinc coated, inner and outer cabinets with epoxy enamel finish on inner cabinet and enamel textured finish on outer cabinet.
Lid	Counter-balanced with magnetic gasket, chrome plated handle with cylinder key-lock and sub lids.
Insulation	Environmentally safe, high density, non-settling urethane foam.
Refrigerant	R404A CFC-free, non-toxic, non-combustible, non-zone depleting refrigerant.
Capacity (Cu.Ft.)	9.4
Capacity (Liters)	266
Exterior (in.) HxWxD	41x60x28
Exterior (cm.) HxWxD	104x152x71
Interior (in.) HxWxD	19" x 49" x 17"
Interior (cm) HxWxD	48 x 124 x 43
Casters	3"
Compressor Size	Permanently lubricated, hermetically sealed 1/3 HP compressor
Condenser Type	Shell

Defrost	Manual
Evaporator Type	Cold Wall
Refrigeration Control	Capillary tube
Elec. Specs (V/Hz/Ph)	115-60-1 or 230/60/1
Shipping Weight-Domestic (lbs./kgs.)	504/229